anti-static pvc flooring tile

Product specification

Size: 600mm*600mm.900mm*900mm

Thickness: 2.0mm 2.5mm 3.0mm

Application range

Widely used in electronics, microelectronics, telecommunications environment, network floor, clean room, computer room and other places with precision instruments and equipment action.

Product introduction

It is composed of PVC resin, plasticizer, stabilizer, coupling agent and conductive material. The conductive network is conductive by the conductive network formed between the interface of plastic particles, which has the function of permanent anti-static.

Quality control and assurance

1. the product has been tested before conducting electrical performance, in line with quality standards.

2. sales representatives can on-site guidance or provide technical support for construction.

3. in the purchase of a year, the product has no material and process defects, such as in accordance with the construction code for the installation and maintenance of Hua Jing, Hua Jing can guarantee its 10 years of shelf life (man-made and other than their own construction).

The above warranty expressly replaces any other warranties, including but not limited to any implied warranties of commercial feasibility or special use.

Maintain

1. because the static floor has impermeable, easy to clean surface dirt.

2. avoid using sharp hard objects to scratch the floor and keep the surface smooth.

3. cleaning the floor with neutral detergent scrub, rinse with water and then dry, and then anti electrostatic wax.

4. serious dirty or black spots can be cleaned with ground cleaning machines.

install

Static conductive floor tiles or electrostatic dissipative tiles should be installed on horizontal, smooth, and non crack foundations. Residual humidity should be below 2.5% CM DUMB test.

Floor tiles, glue and installation area should reach at least 18 degrees of temperature within 24 hours before installation, with good quality conductive adhesive below 100000 ohm to stick the floor tiles. And to further installation details, please contact us.